|
GENERAL SCOPE
Stocked through a wide range of sizes, through mechanical tube,
casing and DOM (drawn over mandrel) product forms.
These grades of low alloy steel containing
Chromium and Molybdenum are the most widely used alloy for oil patch applications. Usually
supplied in the hardened and tempered condition at 22 HRC max. They also find favour in
many applications requiring higher strength levels up to 150 KSI 0.2% PS. The grade is not
NACE MR0175 approved in these conditions, and should not be used in environments
containing H2S.
The hardenability limitations of this grade (depth to
which it will harden / obtain the specified mechanical properties after heat treatment)
must always be taken into account when designing and selecting equipment.
To Buy This Product or Enquire
About Availability And Other Howco Group Services,
click here.
To View Full Product Data Sheets,
howcogroup.com membership is required.
Click Here To Apply.
|
