Low Alloy Steels

Low Alloy Steels

Oil and Gas tools used in the most extreme environments found globally must be able to withstand the most hostile and highly pressurized sour well conditions.

Howco fully understands that in Downhole, Sub Sea, and Wellhead applications, oil tool design emphasis is on safety, dependability and reliability.

Alloys such as 9Cr, 4140 and F22 have been designed to withstand these harsh environments

Howco's extensive Tube and Bar inventories are available to meet the most stringent QA and QC requirements.

For specialist Alloy Steels contact Howco.

Primarily manufactured in:

  • Dubai, UAE
  • Edmonton, Canada
  • Houston, Texas
  • Sheffield, England
  • Singapore

Low alloy 4340: ASTM A29 (VO1.05) General scope AISI 4340 is a low alloy steel containing nominally 0.4% C, 0.8% Cr, 0.25% Mo and 1.8% Ni. Higher strength levels up…
UNS S50400: ASTM A182 (VO1.01) General scope A martensitic steel containing 9% Chromium and 1% Molybdenum is most commonly used in the hardened and tempered condition. When produced as bar…
UNS K21590: ASTM A182 (VO1.01) General scope Grade F22 is a low alloy steel containing nominally 2.25% Chromium. The alloy is widely used in the oil patch wellhead applications for…
Low alloy 4330v: ASTM A29 (VO1.05) General scope AISI 4330v is a low alloy steel containing nominally 0.4% C, 0.8% Cr, 0.25% Mo and 1.8% Ni. Higher strength levels up…
Low alloy 8630: ASTM A29 (VO1.05) General scope AISI 8360 is a low alloy steel containing nominally 0.3% C, 0.5% Cr, 0.2% Mo and 0.5% Ni. The alloy is widely…
Low alloy 4145: ASTM A29 (VO1.05) General scope AISI 4145 low alloy steel containing 0.20% Molybdenum is widely used particularly throughout oil patch applications. Similar to 4140 which has a…
Low alloy 4140: ASTM A29 (VO1.05) General scope AISI 4140 low alloy steel containing Chromium and Molybdenum is the most widely used alloy for oil patch applications. Usually supplied in…
Low alloy 4130:ASTM A29 (VO1.05) General scope AISI 4130 low alloy steel containing nominally 0.3% Carbon, 1% Chromium and 0.2% Molybdenum is widely used in oil patch applications. It is…